Average delivery-flow arithmetic
Translate an entered irrigation volume, days, hours, and delivery margin into an average flow figure for planning review.
Verify local conditions, equipment, water rules, and crop requirements before acting.
The tool divides the calculated or entered water volume by planned irrigation days and hours, then applies the entered delivery margin. It does not size, select, or certify a pump or system.
A 2,500-litre weekly volume delivered over four days and two hours per day is 312.5 litres per hour before margin. This is not a pump specification.
Open a related local planning calculation.
Rainfall TrackerOpen a related local planning calculation.
Irrigation Flow PlannerOpen a related local planning calculation.
Greenhouse ClimateOpen a related local planning calculation.
Crop Yield CalculatorOpen a related local planning calculation.
No. Pump selection requires verified flow, pressure, head, pipe, power, safety, and equipment information.
It is a user-entered planning buffer, not a verified allowance for any particular system.
No. Rainfall, climate, and field information are values you enter and verify.
No. Your local calculation and exports remain in the browser.
Yes. CSV and PDF use the same displayed assumptions and output.
No. Use calibrated measurements and appropriate local guidance separately.
No. It provides basic planning arithmetic, not hydraulic, electrical, pressure, pipe, or equipment design.
No. Crop demand, rainfall distribution, soil, system performance, water supply, and conditions vary.
No. Confirm current local rules, allocations, source conditions, and operational requirements independently.
Check units, actual flow and pressure, system condition, field and crop observations, soil moisture, and applicable rules.